Firestone Metals Building Exterior

Technical Information Sheets

Visit the links below to access Technical Information Sheets for each system.

Profile Panel Systems >> Insulated Metal Panel Systems >> Honeycomb Panel Systems >> Composite Panel Systems >> Aluminum Plate Panel Systems >> Aluminum Rainscreens >> Column Covers >> Sun Screen Systems >> Soffits >> Flat Sheet & Coil

 

Profile Panel Systems

  • Delta Series - All Profiles
    Firestone's Delta Series Concealed Fastner Panels are a high-performance cladding system, offered in a range of materials and profiles to meet the specific needs of a project. View the technical information sheet for all profiles.

  • Delta CFP-12
    The Delta CFP-12 concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-12B
    The Delta CFP-12B concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-12F
    The Delta CFP-12F concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-12T
    The Delta CFP-12T concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-16B
    The Delta CFP-16B concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-16C
    The Delta CFP-16C concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-16F
    The Delta CFP-16F concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-16T
    The Delta CFP-16T concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-16TP
    The Delta CFP-16TP concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-162B
    The Delta CFP-162B concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Delta CFP-162C
    The Delta CFP-162C concealed fastener panels have a unique design that allows for rapid installation and a unique visual safeguard to ensure the panels are correctly interconnected.

  • Omega UR Exposed Fastener Panels
    The UR-Pro Omega Wall Panel is a factory formed corrugated commercial-industrial metal wall and roof panel that provides a traditional metal panel appearance. The UR-Pro Omega wall panel is mechanically fastened with exposed fasteners and can be installed in a non-sequential pattern.

  • Omega HR Exposed Fastener Panels
    The HR-Ultra Omega Wall Panel is a factory formed corrugated commercial-industrial metal wall and roofing panel that provides a traditional metal panel appearance. The HR-Ultra Omega wall panel is mechanically fastened with exposed fasteners and can be installed in non-sequential order.

  • Omega VR Exposed Fastener Panels
    The VR-Classic Omega Wall Panel is a factory formed corrugated commercial-industrial metal wall and roofing panel that provides a traditional metal panel appearance. The VR-Classic Omega wall panel is mechanically fastened with exposed fasteners and can be installed in a non-sequential pattern.

  • 5-V- Crimp Exposed Fastener Panels
    The 5V Crimp Wall Panel is a factory formed corrugated metal wall and roofing panel that provides a traditional metal panel appearance for Commercial & Industrial applications. The 5V Crimp wall panel is mechanically fastened with exposed fasteners.

  • UC-600 Exposed Fastener Panels
    The UC-600 Wall Panel is a factory formed corrugated commercial-industrial metal wall and roofing panel that provides a traditional metal panel appearance. The UC-600 wall panel is mechanically fastened with exposed fasteners and installed in a nonsequential pattern.

  • UC-601 Exposed Fastener Panels
    The UC-601 Wall Panel is a factory formed corrugated commercial-industrial metal wall and roof panel that provides a traditional metal panel appearance. The UC-601 wall panel is mechanically fastened with exposed fasteners and installed in a nonsequential pattern.

Insulated Metal Panel Systems

  • UNA-FOAM Classic Panel
    The UNA-FOAM Classic is an attractive insulated metal wall panel with the look of finished precast concrete. The exterior surface of the panel is a hard aggregated fiber reinforced polymer coating created with a factory applied Classic finish. The Classic finish offers an extremely durable impact and abrasion resistant coating that withstands severe weather conditions.

  • UNA-FOAM Corrugated Panel
    The UNA-FOAM Corrugated insulated metal wall panels combine a traditional 7.2 rib panel design with a polyurethane foam core. This widely used profile is now available with exceptional insulating properties in various thicknesses.

  • UNA-FOAM Flat Panel
    UNA-FOAM Flat insulated metal wall panels are ideal for high profile architectural applications. The Flat profile is designed to be installed vertically or horizontally with concealed clips and fasteners in the side joint. Available design features include custom widths and preformed corners.

  • UNA-FOAM Sonoma Panel
    UNA-FOAM Sonoma insulated metal wall panels are well suited for exterior and interior partition wall applications. The lightly corrugated profile on both faces of the panel ensures symmetry from outside of the building to inside. The Sonoma wall panels may be used for exterior wall applications, but they are not recommended for use on exterior walls of low temp buildings.

  • UNA-FOAM Southwest Panel
    UNA-FOAM Southwest insulated metal wall panels have a flat exterior profile with a heavy embossed, stucco texture that mimics the look of a masonry stucco finish.

  • UNA-FOAM Striated Panel
    UNA-FOAM Straited insulated metal wall panels are an attractive and economical alternative to typical flat wall panels. The exterior face is lightly profiled with narrow longitudinal striations and exhibits a virtual flat appearance from a short distance away.

  • UNA-FOAM Stucco Panel
    The UNA-FOAM Stucco is an exceptionally attractive stucco-like insulated metal wall panel exhibiting the natural beauty that many designers and owners prefer. The exterior is a hard aggregated fiber reinforced polymer coating created with a factory applied finish system, offering a durable impact and abrasion resistant coating that withstands severe weather conditions.

Honeycomb Panel Systems

  • Series 10 Honeycomb Panel
    The Series 10 panels are fabricated using conventional press brake methods and laminated on vacuum press. The panels are mounted to the wall through a continuous flange, typically located on all sides of a panel. The Series 10 panel system is designed as a caulked barrier wall panel system.

  • Series 30 Honeycomb Panel
    The Series 30 panel system is designed as a flush glazed system that aligns with the window mullin. The glazed panel can be designed to accomodate .25" through 1" glazing pockets and can be finished on both sides.

  • Series 45 Honeycomb Panel
    The Series 45 panel system is a glazed in panel. The glazed panel can be designed to accomodate .25" through 1" glazing pockets and can be finished on both sides.

  • Series 2000 Honeycomb Panel
    The UNA-CLAD Series 2000 panel system is mechanically attached with vertical dry-set joint and installed in a sequential pattern. The Series 2000 panels are roll form fabricated and laminated on vacuum press.

Composite Panel Systems

  • Series 1000 Composite Panel
    The Series 1000 panels utilize rout-and-return fabrication. Panel clips are mechanically fastened from the panel to the wall sub-straight. The Series 1000 panel system is designed as a caulked barrier wall panel.

  • Series 1200 Composite Panel
    The Series 1200 uses rout-and-return fabrication with mechanically fastened extruded perimeter frame. The panels are then mounted to the wall with a custom snap on and slide attachment clip. The Series 1200 panel system is designed as a low cost water managed system that controls the impact of wind driven rain on exterior walls.

  • Series 1500 Composite Panel
    The Series 1500 uses rout-and-return fabrication with mechanically fastened extruded perimeter frame. The panels are then mounted to the wall with a continuous custom painted perimeter extrusion. The Series 1500 panel system is designed as a high tech water managed system; it has a rainscreen appearance and controls the impact of wind driven rain on exterior walls.

Aluminum Plate Panel Systems

  • Series 2500 Aluminum Plate Panel
    The UNA-CLAD Series 2500 panel system is a high performance system of aluminum plate material using extruded aluminum framing, subgrits and splines. The Series 2500 is a guttered system that has weeps at every horizontal joint. The system is gasketed for "dry joints" without the use of exposed sealant.

  • Series 3000 Aluminum Plate Panel
    The Series 3000 panel system is designed to utilize a .125" solid aluminum skin. The Series 3000 panel system utilizes break form fabrication, however this system is easily the most versatile product offered by Firestone Metal Products and includes many fabrication options. The Series 3000 panel system is designed as a caulked barrier wall panel system.

  • Series 3200 and 3200NR Aluminum Plate Panels
    The UNA-CLAD™ Series 3200 and 3200NR panel systems are designed to utilize a .125” solid aluminum skin. The systems utilize break form fabrication with mechanically fastened extruded perimeter frame. They are designed as a low cost water managed system that controls the impact of wind driven rain on exterior walls.

Aluminum Rainscreens

  • Series 4000 Aluminum Plate Rainscreen
    The UNA-CLAD Series 4000 is an aluminum plate rainscreen system with extruded aluminum vertical track and gutter, and must be backed by a waterproof membrane. The system performs under the principle of pressure equalization.

  • Series 4500 Aluminum Plate Rainscreen
    The UNA-CLAD Series 4500 is a rain screen system of aluminum plate or natural metals. The system is attached with continuous horizontal cleats and a guttered vertical joint.

Column Covers

  • Series 100 Column Cover
    The Series 100 caulk or trim in-fill joint column covers are available in round, square, rectangular, and oblong configurations. Convert unfinished concrete columns, I-beams, or corner conditions to enhance the appearance of the building.

  • Series 200 Column Cover
    The Series 200 hairline joint column covers are available in round, square, rectangular, and oblong configurations. Convert unfinished concrete columns, I-beams, or corner conditions to enhance the appearance of the building. New installer friendly alignment pin allows for final adjustment at the hairline joint without removal of column section.

Sun Screen Systems

  • SC-1 Extruded Sun Screen
    The UNA-CLAD SC-1 is an exterior aluminum screen system that is functional and enhances a building's appearance. An extensive selection of extruded blade options are available as well as multiple wall attachment options. Choose from standard offerings or customize sunscreen to a specific building.

  • SC-2 Honeycomb Sun Screen
    The UNA-CLAD SC-2 exterior laminated aluminum screen system is functional and enhances a building's appearance. An extensive selection of extruded blade options are available as well as multiple wall attachment options. Choose from standard offerings or customize sunscreen to a specific building.

  • LS-1 Light Shelf
    The UNA-CLAD LS-1 aluminum honeycomb light shelf system enhances a building's interior appearance by directing daylight deeper in to the interior of the building to increase passive lighting. The light shelves, combined with UNA-CLAD sunscreens, provide an integrated light management system.

Soffits

  • UC-500 Flush Panel for Architectural Soffit & Fascia Systems
    The UC-500 Flush Panel is a factory-formed, interlocking, architectural metal panel designed for soffit and fascia applications. The UC-500 Flush Panel offers the design professional a flush or flat appearance by utilizing an interlocking leg and concealed fastening system.

  • UC-501 Reveal Flush Panel for Architectural Soffit & Fascia Systems
    The UC-501 Reveal Flush Panel is a factory-formed, interlocking, architectural metal panel designed for soffit and fascia applications. The UC-501 Reveal Flush Panel offers the design professional a flat appearance with an aesthetically pleasing reveal by utilizing an interlocking leg and concealed fastening system.

  • UC-750 V-Groove Panel for Architectural Soffit Systems
    The UC-750 Soffit Panel is a factory-formed, interlocking, architectural aluminum panel designed for soffit applications. The UC-750 Soffit Panel offers the design professional a clean, traditional appearance by utilizing an interlocking leg and concealed fastening system. The panel is available in a full, half, or no-vent option to allow for air flow and under eave ventilation.

Flat Sheet & Coil